Ratchet HF1012

Description

Ratchet HF1012 

Dimension:

• Outside : 14 mm
• Inside : 10 mm
• Width: 12 mm

Ratchet Wheel Maintenance

1. Loosen the axle and take the wheel off the frame
2. Take off the axle. Use soft rubber or a wood mallet (to protect the threads).
3. Clean and dry all parts with a clean cloth. Do not use solvents!
4. Grease the axle and the ratchet (and also the inside of the wheel) with low friction water repellent grease.
5. Using too much or too viscous a grease may cause the ratchet mechanism to slip in colder temperatures.
6. Check the bearings. If they feel and sound "rough", replace them.
7. Place the axle inside the wheel and carefully insert the bearings.
8. Mount the assembled wheel onto the frame (the axle must be placed to the very bottom of the fork slots) and make sure, that the axle nuts are tight.
9. If any grease should get smeared on the outer surface of the wheel, be sure to clean it off as the grease can degrade the rubber compound which the wheel is made of.